EDGE BELT POLISHING
MACHINE semi-automated cutting, profiling and
milling machine semi-automated
cutting & shapingworking machinery semi-automated cutting & shaping working
machinery Marble
grinding machine (automatic) Granite cutting machine OEM/ODM
MANUFACTURE TAIWAN CHINA
Likest Corporation
OEM/ODM WELCOME
LD2000 semi-automated cutting, profiling and milling machine
Contact
us BACK
HOME
semi-automated cutting &
shapingworking machinery
DIA POLISHER BELT
|
¡@ |
EDGE BELT POLISHING MACHINE
. |
|
INTRODUCTION
EASY Operation and Setting!
The Edge Belt Polishing Machine is the revolutionary stone polishing
machine that is simple to use, energy-efficient and cost effective.
With its high accuracy and high stability features, this machine can
handle thickness ranges and lengths that exceed other belt polishing
machines in its class. |
|
| ¡@ |
 |
| ¡@ |
Contact us for more product information
|
|
|
 |
| ¡@ |
- HIGH ACCURACY |
| ¡@ |
- HIGH STABILITY |
| ¡@ |
- EASY TO OPERATE |
| ¡@ |
- EASY TO INSTALL |
| ¡@ |
-
COST EFFECTIVE |
|
| ¡@ |
A new and improved system for polishing of granite, marble
and homogeneous tile edges. Thickness ranges from 10 - 50mm and
offers a big reduction in work time, a huge cut in production costs
and a degree of polish that is better than that of slab surface.
The
machine will easily polish a stone with length ranging from 100mm to
3,000mm. (Upon request, other lengths are also available).
With
this new, simple, efficient and economical system that comes with a
sturdy mechanical structure, stone polishing will never be the same
again
Functions:
1.New type motor
to save power.
2.Press the ON/OFF button, it will grind automatically and spray
water to save manpower.
3.It can set up the frequency of cycles then stop automatically.
4.It can grind into polishing straight line without distorting.
This Polishing Machine can for beveller edges mostly rounded
profiles of stone.
Set a machine on "L" shape guide rail, so, everyone can easily work
by very simple operation. |
¡@ |
|
|
| ¡@ |
TECHNICAL DATA |
| ¡@ |
Motor: |
Pneumatic, speed from 0 - 4,000 RPM (Continuous speed pre-selection) |
(0.16KW) |
| ¡@ |
¡@ |
¡@ |
¡@ |
| ¡@ |
¡@ |
Electrical, speed from 2,000 - 6,500 RPM
(Continuous speed pre-selection) |
(1,200Watts) |
| ¡@ |
¡@ |
¡@ |
¡@ |
| ¡@ |
Slab Thickness: |
10-50 mm |
¡@ |
| ¡@ |
¡@ |
¡@ |
¡@ |
| ¡@ |
Total Weight: |
12 kg (Without the L Frame) |
¡@ |
¡@
| ¡@ |
OPTION
EQUIPMENT |
| ¡@ |
1
no. x Guide Carriage with length totaling 900mm
(other lengths
available upon request) |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 60 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 100 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 200 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 400 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 800 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 1,500 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # 3,000 |
| ¡@ |
1
no. x Polishing Belt length 670mm x 40mm Grit # BUFF |
Perfect fitting and sharp cutting by CPM-DIA BELT.
¡@
| ¡@ |
1
no. x Air Hose |
1
no. x Water Hose |
| ¡@ |
1
no. x Open End Wrench |
1
no. x Splash Guard |
| ¡@ |
1
no. x Side Handle |
1
no. x Stop Guard |
 |
Profiles that can be polished with our system. |
|
|
Marble
grinding machine (automatic)
Marble
grinding machine (manual)
Functions:
a. Easy of operation and installation.
b. Suitable for CPM-DIA belt.
It will be perfect installation and sharp cutting.
This is for:
a. Polishing machine of mostly round lateral stone to be cut into oblique angle
edge.
b. Place a machine on L shape sliding rail so that everyone may operate with
simple method easily.
¡@
¡@
¡@
The
LD2000 semi-automated cutting, profiling and milling
machine that was design for high output, easy operation, very low
maintenance with excellent reliability. Extremely stout structure free from
vibration. Table movement on high steel guide submerse in oil resulting in
zero wear and tear. Electric plant and control panel from international
brand, 100% water resistant. Major machine movement equip with sensor for
precise movement.
Waterworks complete with all necessary hoses and valves.
For further information, please contact us |
¡@ |
 |
¡@ |
|
|
| ¡@ |
¡@ |
Side view showing 45 degree angle cut & HOGH
POWER main motor + control panel |
¡@ |
|
|
| ¡@ |
|
 |
|
| ¡@ |
 |
¡@ |
¡@ |
|
|
| ¡@ |
¡@ |
The
LD2000
ready for
delivery to our next customer! |
¡@ |
| ¡@ |
¡@ |
|
| ¡@ |
Top view of our
LD2000
with detail
of main motor, well seal electric box and low tension control box |
¡@ |
| ¡@ |
| ¡@ |
 |
¡@ |
|
| ¡@ |
LD2000
handwheel for table movement with detail pic
of "EASY INTERCHANGEABLE CHAIN" |
¡@
|
|
¡@ |
¡@ |
¡@ |
¡@ |
¡@ |
| ¡@ |
¡@ |
We release the new semi-automated
cutting & shaping working machinery with the following characteristic:-
-
Cutting head with up & down
motion with 45 degree cutting ( 90 degree optional )
-
Attached with " easy adjustment
" end-cutting gauge.
-
Functional control panel
-
5 H.P main motor.
-
Diameter of blade from 200mm
onward, maximum 350mm
-
Standard cutting dimension of
1200mm x 1200mm. Other size optional.
|
Granite
cutting machine (automatic)
Functions:
Press the ON/OFF button, it will automatically put out the cutter to spray and
cut.
The cutting tool will ascend automatically after cutting to save cutting tool
worn out rate for 40%.
Features:
The cutting tool may turn around for replacement of granite molded cutter
housing.
It can the semi-circle and full-circle cutting.
One machine serves multiple purposes.
Contact
us BACK
HOME
